A Step-by-step Guide to Clean Area Rugs Yourself

Home > Rug Cleaning > A Step-by-step Guide to Clean Area Rugs Yourself

Is your rug doesn’t shimmer anymore? Maybe it’s time to clean it! But how? You might have often read or heard that area rug cleaning at home is not safe, and you should always hire experts for the job. True! But you can’t ask expert area rug cleaners to clean the flooring every other month. For that, you have to become the rug cleaning master.

Need some quick tips and tricks to get started? Read on.

Note: An area rug can be too large for a person to handle successfully. So, ask your friends or loved ones to help you with area rug cleaning. In a couple of hours, you will see the shine on your flooring.

Step 1: Find an Outdoor Area to Clean the Rug

  • Pick a day according to your work schedule and weather and decide where to clean your flooring.
  • Avoid depending on a clothesline for hanging a heavy and wet rug. The support system should be robust, like tree branches or a wooden stand.

Step 2: Vacuum Clean Both Sides

  • Vacuum the flooring and flip it to vacuum the other side.
  • When you are sure all dust and dirt particles are out of the rug, roll it and take it outside.
  • If your flooring is still filthy, beat it with a broom handle.

Pro Tip: Don’t whack vigorously; that can damage the threads. Instead, give it a few firm knocks and keep beating until all dust clouds vanish.

Step 3: Test Rug Shampoo or Other Solution You Have Picked

  • Always test the cleaner on a small patch before applying it to the entire rug.
  • Check the corner carefully for fibre damage or colour bleeding.

Pro Tip: Always check the shampoo’s instructions and rug’s label to check if those cleaning agents are designed for the material or not. Don’t go for cheaper cleaners as they may do more harm than good.

Step 4: Wash the Rug with Cleaning Solution

  • Pull out a garden hose and rinse your flooring.
  • Apply the cleaner deep into the fibres using a sturdy brush.
  • Let it sit for a few minutes and rewash it.
  • Ensure complete removal of shampoo’s foam and residue.

Step 5: Allow the Rug to Dry Completely and, At Last, Vacuum Again

  • After rinsing, let the flooring dry for a day or more, depending on the moisture.
  • Put the rug back on the floor and vacuum it. The flooring’s fibres may tangle or look odd after washing. Vacuum cleaning will restore its quality and help your rug make your foot warm.

These area rug cleaning steps will help you implement a simple and proven method to clean your floorings with the least effort and time. Set up a routine that blends with your schedule and not against it.

Also, hire the best area rug cleaners for yearly cleaning. Nothing can compare to the results of professional cleaning. So, consider hiring them when needed (especially in tough stains and water damage).

Schedule Booking